15 modelos

Pré-aquecedores termoplásticos

Compare compact, hydraulic, double-cylinder, temperature-controlled, and vehicle-mounted hot melt kettles for thermoplastic road marking paint.

8 modelos

Pré-aquecedores de dois tanques

JW-1200 Energy-saving Hydraulic Double Cylinder Diesel Pré-Aquecedor Termoplástico

Engine: 15ps electric start evaporative water-cooled diesel engine (Optional: 16ps electric start air-cooled diesel engine)
Internal Structure of the Fuselage: Double-layer pot wall structure for fire channel control. Special stainless steel pot bottom and pot wall improve heating efficiency and durability.

Especificações →

Pré-aquecedores termoplásticos

JW-1200 Hydraulic Double Cylinder Pré-Aquecedor Termoplástico

Engine: 16HP electrically started evaporative water-cooled diesel engine
Internal Structure of the Fuselage: The double layer of the pot wall is used to control the fire channel. Special stainless steel pot bottom and pot wall are adopted, with the special stainless steel pot wall controlling the fire channel for improved heating efficiency.

Especificações →

Pré-aquecedores termoplásticos

JW-1200 Oil And Gas Dual-use Hydraulic Double Cylinder Pré-Aquecedor Termoplástico

Engine: 16HP electrically started evaporative water-cooled diesel engine
Internal Structure of the Fuselage: The double layer of the pot wall is used to control the fire channel. Special stainless steel pot bottom and pot wall are adopted, with the special stainless steel pot wall controlling the fire channel for improved heating efficiency.

Especificações →

Pré-aquecedores termoplásticos

JW-2T Diesel Hydraulic Double-Cylinder Pré-Aquecedor Termoplástico

Engine: 28ps(20kw) Electric Start Evaporative Water-Cooled Diesel Engine
Inner Structure of the Kettle Body: Double-layer kettle wall for controlling the fire channel, including special stainless steel kettle wall for controlling the fire channel and a hanging material bucket

Especificações →

Pré-aquecedores termoplásticos

JW-500 Hydraulic Double Cylinder Pré-Aquecedor Termoplástico (Parking Lot)

Engine: 7.5ps electric start evaporative water-cooled diesel engine
Hydraulic Drive Mode: The stirring shaft is driven by gear pump, multi-way hydraulic valve, relief valve and hydraulic motor

Especificações →

Pré-aquecedores termoplásticos

JW-600 Mechanical Double Cylinder Pré-Aquecedor Termoplástico

Engine: 7.7ps evaporative water-cooled diesel engine
Hydraulic Drive mode: The diesel engine drives the stirring shaft through the turbine gearbox and clutch gear

Especificações →

Pré-aquecedores termoplásticos

JW-800 Hydraulic Double Cylinder Pré-Aquecedor Termoplástico

Engine: 16.5HP Electrically started evaporative water-cooled diesel engine
Internal Structure of the Fuselage: The double layer of the pot wall is used to control the fire channel

Especificações →

Pré-aquecedores termoplásticos

JW-800 Oil and Gas Dual-use Hydraulic Double Cylinder Pré-Aquecedor Termoplástico

Engine: 16HP electrically started evaporative water-cooled diesel engine
Internal Structure of the Fuselage: The double layer of the pot wall is used to control the fire channel

Especificações →

3 modelos

Pré-aquecedores com controle de temperatura

Pré-aquecedores termoplásticos

JW-1.5T Thermal Oil Temperature Control Kettle

Engine: 10P air-cooled electric start diesel engine
Internal Structure of the Kettle Body: The frame structure, the inner liner outer cover plate between the thermal insulation board insulation material; Double helix full tank heating system

Especificações →

Pré-aquecedores termoplásticos

JW-2T Diesel Oil Temperature Control Pré-Aquecedor Termoplástico

Engine: 28hp Changchai diesel engine
Electronic Systems: Alternating current 220V, with leakage protection device

Especificações →

Pré-aquecedores termoplásticos

JW-4T&6T Energy Efficient Temperature Control Pré-Aquecedor Termoplástico

Internal Structure of the Fuselage: The frame structure is insulated with thermal insulation material between the inner shell and the outer cover plate. Double-helix full-tank internal heating system.
Hydraulic Transmission System: Bidirectional hydraulic stirring, BM500 hydraulic motor

Especificações →

2 modelos

Pré-aquecedores veiculares

Pré-aquecedores termoplásticos

JW-200 Vehicle-mounted Pré-Aquecedor Termoplástico

Dual-cylinder Large Capacity Design: The JW-200 adopts a dual-cylinder structure (2000 kg total capacity), with each cylinder holding up to 1000 kg of thermoplastic material. The two kettles melt material simultaneously, enabling continuous operation and greatly improving construction efficiency, especially for large-area road marking projects.
Fast Melting Technology: The equipment uses a high-efficiency temperature-controlled burner combined with an optimized combustion chamber system to achieve complete fuel atomization and high-oxygen combustion. Compared with conventional equipment, the melting speed is increased by more than 30%, shortening construction time. It is also one of the first computer-controlled hot melt kettles developed in China. Basic Parameters

Especificações →

Pré-aquecedores termoplásticos

JW-2000 Vehicle-mounted Silent Pré-Aquecedor Termoplástico

Dual-Cylinder Large Capacity Design: This mainstream vehicle-mounted hot melt kettle features a dual-cylinder structure (2000 kg), with a single cylinder capacity of up to 1000 kg. The
Truck Type: JAC

Especificações →

2 modelos

Pré-aquecedores compactos

Pré-aquecedores termoplásticos

JW-300 Mechanical Single Cylinder Pré-Aquecedor Termoplástico

Engine: 6.6ps diesel engine
Hydraulic Drive Mode: The diesel engine drives the stirring shaft through the turbine gearbox and clutch gear

Especificações →

Pré-aquecedores termoplásticos

JW-400 Hydraulic Single Cylinder Pré-Aquecedor Termoplástico

Engine: 7.7ps diesel engine
Hydraulic Pressure System: The hydraulic reversing control valve is used for positive and reverse stirring, and the speed is infinitely variable

Especificações →

RELATED EQUIPMENT

Escolha pelo tipo de tinta, máquina ou aplicação.

Ver os 59 modelos →

Sinalização termoplástica

Hand-push, ride-on, extrusion, spray, and raised-profile thermoplastic road marking machines.

Ver todos os equipamentos →

Sinalização com tinta fria

High-pressure airless line striping machines for roads, parking lots, airports, and industrial floors.

Ver todos os equipamentos →

Remoção e reciclagem

Mechanical and ultra-high-pressure pavement marking removal equipment with optional material recovery.

Ver todos os equipamentos →

Sinalização bicomponente

Spray, screed, and dot-coating road marking equipment for compatible MMA, cold-plastic, and epoxy systems.

Ver todos os equipamentos →

Preparação de superfícies

Pavement cleaning equipment for blowing, sweeping, and drying before line marking.

Ver todos os equipamentos →